Featured Products

HR5210C Makita HR5210C 2" AVT Rotary Hammer

Qty/Box: 1
Call To Order

Makita HR5210C Rotary Hammer

Double click on above image to view full picture

Zoom Out
Zoom In


    • Powerful 15 AMP motor delivers 14.8 ft.lbs. of impact energy to handle the most demanding applications
    • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
    • Soft start suppresses start-up reaction for more control and better accuracy
    • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
    • L.E.D. power light indicates switch failure or cord damage
    • Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
    • Variable speed control dial enables user to match the speed to the application for greater versatility
    • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
    • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
    • Extended life brushes are longer for more work between service intervals and less downtime
    • Automatic brush cut-off protects commutator from damage for longer tool life
    • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
    • 16 bit angle settings allow the bit to be set at different positions for operating convenience
    • One-touch sliding chuck for quick bit changes
    • Lock-on switch for continuous operation ("Hammering Only" mode)
    • Rubberized ergonomic soft grip provides more comfort and control
    • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
    • Capacity (concrete drilling): 2"
    • No Load Speed (variable speed): 130 - 260 RPM
    • Blows Per Minute (variable speed): 1,075 - 2,150 BPM
    • Impact Energy (ft.lbs.): 14.8 ft.lbs.
    • Impact Energy (Joules): 20 J
    • AMPS: 15
    • Bit Type: Accepts SDS-MAX
    • Overall Length: 23-1/2"
    • Net Weight: 26.6 lbs.
    • UPC Code: 088381-081313